Dear Curt,
in message <20030106183517.E24490 at curtisb.com> you wrote:
>
> I am running ELDK 2.0.2 which does have RPMs for pcmcia-cs and
> wireless-tools. I also see my target installation has the "iwconfig"
> program installed in /sbin. The target also has /etc/pcmcia/* and
> /etc/rc.d/init.d/pcmcia.
OK.
> >From your email I gather all I need to do is recompile my kernel to
> include support for the wireless LAN (CONFIG_NET_RADIO) . Is that
> correct ?
Right, but you need a recent kernel (from our CVS). The kernel
specific parts (stuff like drivers/pcmcia/m8xx_pcmcia.c) were added
after the release of ELDK 2.0.2 [and some more extensions like
simultaneous support for both PCMCIA slots on MPC860 systems was
added even later].
Don't forget to run
bash$ make modules
bash$ make modules_install INSTALL_MOD_PATH=/opt/eldk/ppc_8xx
when building your kernel.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Of course there's no reason for it, it's just our policy.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
