In message <885489B3B89FB6449F93E525DF78777F064533 at srvnt506.ALLOPTIC.COM> you wrote: > > So, after changed the kernel address to 0xc0000000 the kernel did > bootup with the following dump: ... eth0: CPM ENET Version 0.2 on SCC1, 00:00:00:00:00:00 eth1: FEC ENET Version 0.2, FEC irq 3, addr 00:00:00:80:00:00
Ummm... does not look like valid MAC addresses to me. > Looking up port of RPC 100003/2 on 192.168.0.59 > RPC: sendmsg returned error 101 > portmap: RPC call returned error 101 errno=101 -- Network is unreachable > Looks like my IP has some problem. I will like to use the BDI with the ddd It's more that your MAC address is bogus. > on my linux server. When i start the ddd with the following command as > suggested > by the appnote > ddd -debugger gdb -gdb vmlinux Which appnote? Doesn't it mention that you need to run a PowerPC version of GDB, either natively or a cross-GDB? > (gdb)target remote bdi:2001 > Remote packet too long: > c00021a00040b.............. > > It seems there is a problem between the BDI and the DDD on my linux PC. I > am running > redHat 8.0, GNU DDD 3.3.1 (i686-pc-linux-gnu) The problem is that "gdb" will start the native GDB, which does not work on PowerPC systems. You have to specify the name of your PowerPC Cross-GDB. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de You don't have to stay up nights to succeed; you have to stay awake days. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
