This must be a minicom setting (although I can't find it) -- control-C works fine for me in minicom.
-----Original Message----- From: Der Herr Hofrat [mailto:[EMAIL PROTECTED] Sent: Monday, January 13, 2003 12:20 PM To: markc at mail.com Cc: linuxppc-embedded at lists.linuxppc.org Subject: Re: Control-C in bash ??? > > On a PC, I can, for instance, enter "ping 192.168.1.4", then hit Control-C > and stop the ping. For the life of me, I can't figure out how to do the > same on my MPC860 system!!! > > I have an MPC860 running 2.4.19, with a mostly unmodified eldk distribution > from Wolfgang Denx. I did modify the init script to use /dev/console instead > of /ttyx (standard driver using SMC1). I'd not only like a solution, I want > to undertand how cancelling a shell command is supposed to work - I've poked > around and I can't figure out what's supposed to happen - Does the shell > generate a SIGINT, or the uart driver, or what? Any enlightenment will be > greatly appreciated... I belive that the problem is that the control-C never arives on the console as the serial-comunication package you are using does not deliver it (atleast minicom does not) - You can use ping -c 1 (not sure if your ping also takes -c # for the count) to ensure that it will terminate after one ping package. That was my workaround... hofrat ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
