Hi ...
I posted a question regarding this a little while ago but I didn't really
get anywhere with solutions I was given ...
I am trying to build GCC with the below 3 scripts build-gccBootStrap.sh,
build-glibc.sh, and build-gccWithGlibc.sh ... I keep having problems once I
get to the part where gcc is build gthr-threads.h ...
I can build glibc and bootstrapped compiler with newlib just fine ...
The error I get is:
In file included from gthr-default.h:1,
from ../../gcc-2.95.3/gcc/gthr.h:98,
from ../../gcc-2.95.3/gcc/libgcc2.c:3034:
../../gcc-2.95.3/gcc/gthr-posix.h:39: parse error before `__gthread_key_t'
../../gcc-2.95.3/gcc/gthr-posix.h:39: warning: data definition has no type
or storage class
../../gcc-2.95.3/gcc/gthr-posix.h:40: parse error before `__gthread_once_t'
../../gcc-2.95.3/gcc/gthr-posix.h:40: warning: data definition has no type
or storage class
../../gcc-2.95.3/gcc/gthr-posix.h:41: parse error before `__gthread_mutex_t'
../../gcc-2.95.3/gcc/gthr-posix.h:41: warning: data definition has no type
or storage class
../../gcc-2.95.3/gcc/gthr-posix.h:59: `pthread_create' undeclared here (not
in a function)
../../gcc-2.95.3/gcc/gthr-posix.h:78: parse error before `*'
../../gcc-2.95.3/gcc/gthr-posix.h:78: parse error before `)'
I have been told it is probably a problem with --headers ... but I am not so
sure ... I think I have set it up properly ... as you can see below ...
Thanks as always,
Jim
#!/bin/bash
#-------------------------------------------------------------
# This bash script creates a linux x866 gcc cross compiler
# for powerpc. This file has been tested with the following
# modules:
# 1.) binutils-2.13.90.0.2.tar.gz
# 2.) gcc-3.2.tar.gz
# 3.) newlib-synSept12-2002.tar.gz
#-------------------------------------------------------------
# Defining target
TARGET=powerpc-linux
# Defining prefix - final toolchain location
PREFIX=$HOME/ppcgcc
# PATH must updated
PATH=$PREFIX/bin:$PATH
export PATH
# My local includes
#INCLUDE=/usr/include/
INCLUDE=/home/jgdon/ppclinux/include
# Configuring packages versions
GCC_VER=2.95.3
BINUTILS_VER=2.13.90.0.2
NEWLIB_VER=1.10.0
echo ===================================================
echo BUILDING BINUTILS FOR $TARGET
echo ===================================================
# binutils
rm -rf binutils-$BINUTILS_VER binutils
tar zxvf binutils-$BINUTILS_VER.tar.gz
mkdir binutils
cd binutils
../binutils-$BINUTILS_VER/configure --target=$TARGET --prefix=$PREFIX
make all
make install
cd ..
echo ===================================================
echo BUILDING GCC FOR $TARGET
echo ===================================================
echo extract GCC source from tar ball ...
rm -rf gcc-$GCC_VER gcc
tar zxvf gcc-core-$GCC_VER.tar.gz
tar zxvf gcc-g++-$GCC_VER.tar.gz
echo extract newlib source from tar ball- needed for gcc ...
rm -rf newlib-$NEWLIB_VER newlib
tar zxvf newlib-$NEWLIB_VER.tar.gz
echo set up symbolic links to newlib in gcc dir
cd gcc-$GCC_VER
ln -s ../newlib-$NEWLIB_VER/newlib newlib
ln -s ../newlib-$NEWLIB_VER/libgloss libgloss
cd ..
echo build gcc ...
mkdir gcc
cd gcc
../gcc-$GCC_VER/configure --target=$TARGET --with-newlib --prefix=$PREFIX
--with-gnu-as --with-gnu-ld --with-headers=$INCLUDE
make all
make install
cd ..
echo ===================================================
echo BUILDING NEWLIB FOR $TARGET
echo ===================================================
# newlib
mkdir newlib
cd newlib
../newlib-$NEWLIB_VER/configure --target=$TARGET --prefix=$PREFIX --nfp
make all
make install
cd ..
-=-=-=-=-=-=-=-=-
#!/bin/bash
#-------------------------------------------------------------
# This file builds glibc and recompiles gcc to link it to gcc
#
# This bash script creates a linux x866 gcc cross compiler
# for powerpc. This file has been tested with the following
# modules:
# 1.) binutils-2.13.90.0.2.tar.gz
# 2.) gcc-3.2.tar.gz
# 3.) newlib-synSept12-2002.tar.gz
#-------------------------------------------------------------
# Defining target
TARGET=powerpc-linux
# Defining prefix - final toolchain location
PREFIX=$HOME/ppcgcc
# PATH must updated
PATH=$PREFIX/bin:$PATH
export PATH
# My local includes
INCLUDE=/home/jgdon/ppclinux/include
# Configuring packages versions
GCC_VER=2.95.3
BINUTILS_VER=2.13.90.0.2
NEWLIB_VER=1.10.0
#Define where kernel source is
KERNEL_SOURCE=$HOME/ppclinux
#These are the glibc files I am using ...
# glibc-linuxthreads-2.3.1.tar.gz
# glibc-2.3.1.tar.gz
GLIBC_THREADS_VER=2.2.3
GLIBC_VER=2.2.3
#
#Where we want to install compiled glibc
#
INSTALL_DIR=$HOME/powerpc-linux-gcc-glibc/
echo ===================================================
echo BUILDING GLIBC FOR $TARGET
echo ===================================================
ln -sf $KERNEL_SOURCE/include/asm $INSTALL_DIR/include/asm
ln -sf $KERNEL_SOURCE/include/linux $INSTALL_DIR/include/linux
tar zxfv glibc-$GLIBC_VER.tar.gz
cd glibc-$GLIBC_VER
tar zxfv ../glibc-linuxthreads-$GLIBC_THREADS_VER.tar.gz
CC=powerpc-linux-gcc AR=powerpc-linux-ar RANLIB=powerpc-linux-ranlib
./configure --host=powerpc-linux --enable-add-ons
--with-headers=$INSTALL_DIR/include --prefix=
make
make install_root=$INSTALL_DIR install
-=-=-=-=-=-=-=-=-=-=-=-=-
#!/bin/bash
#-------------------------------------------------------------
# This file builds glibc and recompiles gcc to link it to gcc
#
# This bash script creates a linux x866 gcc cross compiler
# for powerpc. This file has been tested with the following
# modules:
# 1.) binutils-2.13.90.0.2.tar.gz
# 2.) gcc-3.2.tar.gz
# 3.) newlib-synSept12-2002.tar.gz
#-------------------------------------------------------------
# Defining target
TARGET=powerpc-linux
# Defining prefix - final toolchain location
PREFIX=$HOME/ppcgcc
# PATH must updated
PATH=$PREFIX/bin:$PATH
export PATH
# My local includes
#INCLUDE=/usr/include/
INCLUDE=$HOME/powerpc-linux-gcc-glibc/include
# Configuring packages versions
GCC_VER=2.95.3
BINUTILS_VER=2.13.90.0.2
NEWLIB_VER=1.10.0
#Define where kernel source is
KERNEL_SOURCE=$HOME/ppclinux
#These are the glibc files I am using ...
# glibc-linuxthreads-2.3.1.tar.gz
# glibc-2.3.1.tar.gz
GLIBC_THREADS_VER=2.2.3
GLIBC_VER=2.2.3
#
#Where we want to install compiled glibc
#
INSTALL_DIR=$HOME/powerpc-linux-gcc-glibc/
# These are the instructions to build glibc from penguinppc.org ...
#
#You must first follow the kernel instructions, but you may omit the make
zImage portion
# ln -sf <top of Linux kernel tree>/include/asm
/usr/powerpc-linux/include/asm
# ln -sf <top of Linux kernel tree>/include/linux
/usr/powerpc-linux/include/linux
# tar zxf glibc-x.x.x.tar.gz
# cd glibc-x.x.x
# tar zxf ../glibc-linuxthreads-x.x.x.tar.gz
# CC=powerpc-linux-gcc
# AR=powerpc-linux-ar
# RANLIB=powerpc-linux-ranlib
# ./configure --host=powerpc-linux --enable-add-ons
--with-headers=/usr/local/powerpc-linux/include --prefix=
# make
#DANGER: You WILL screw up your system if you forget the install_root part
of the next command.
# make install_root=/usr/local/powerpc-linux install
echo ===================================================
echo BUILDING GLIBC FOR $TARGET
echo ===================================================
#ln -sf $KERNEL_SOURCE/include/asm $INSTALL_DIR/include/asm
#ln -sf $KERNEL_SOURCE/include/linux $INSTALL_DIR/include/linux
#tar zxfv glibc-$GLIBC_VER.tar.gz
#cd glibc-$GLIBC_VER
#tar zxfv ../glibc-linuxthreads-$GLIBC_THREADS_VER.tar.gz
#CC=powerpc-linux-gcc AR=powerpc-linux-ar RANLIB=powerpc-linux-ranlib
./configure --host=powerpc-linux --enable-add-ons
--with-headers=$INSTALL_DIR/include --prefix=
#make
#make install_root=$INSTALL_DIR install
echo ===================================================
echo BUILDING GCC WITH GLIBC FOR $TARGET
echo ===================================================
cd $PREFIX
rm -rf gcc-$GCC_VER gcc-glibc
tar zxvf gcc-core-$GCC_VER.tar.gz
tar zxvf gcc-g++-$GCC_VER.tar.gz
#To rebuild gcc using glibc instead of newlib for the library:
mkdir gcc-glibc
cd gcc-glibc
#../gcc-$GCC_VER/configure --target=powerpc-linux --enable-shared
--enable-threads
../gcc-$GCC_VER/configure --target=$TARGET --prefix=$PREFIX --enable-shared
--with-gnu-as --with-gnu-ld --with-headers=$INCLUDE --enable-threads
make
make install
cd ..
echo ===================================================
echo FINISHED BUILDING GCC WITH GLIBC FOR $TARGET
echo ===================================================
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
