Hi, we have quit a bunch of boards with the 860T processor available. If interested, please check into http://www.pep.com/e2brain or http://www.pep.de/products/productdetails.php?productid=139 or http://www.pep.de/products/productdetails.php?productid=133
We supply a Linux-BSP including a 2.4.18 Kernel for all our PowerPC boards. One drawback i should mention: We have BSP's available for our 8245 and 750CX platforms already; the 860T BSP's are under development in the moment. -- Mit freundlichen Gru?en / Best regards Claus Gindhart Software Design Engineer PEP Modular Computers GmbH phone: +49-8341-803-374 R&D Software fax: +49-8341-803-40-374 Sudetenstrasse 7 email: claus.gindhart at kontron.com D-87600 Kaufbeuren web page: http://www.pep.de http://www.kontron.com -----Original Message----- From: Thomas Andrews [mailto:[EMAIL PROTECTED] Sent: Donnerstag, 30. Januar 2003 08:08 To: linuxppc-embedded at lists.linuxppc.org Subject: Development hardware Hi Folks I see in the docs that the Motorola FADS board is to be avoided. Unfortunately this is all I have access to - Unless someone has an inexpensive alternative for me ? Suggestions ? I want to play with the 860T, which is what I currenly have on the FADS board. The BDM I have is an Ocdemon Raven. There is linux support for this on the ocdemon web site, but is there an open source bdm driver ? I really don't want to rely on binaries. Oh, and one more thing does anyone know if the Raven supports the MMU table-walk ? Many thanks, Thomas ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
