Thanks Wolfgang. I'll look into it and if I don't report back, everything is resolved. I had previously search the mailing list on "ELDK and 440GP" but didn't come up with anything. I should have changed my search variables.
-- Brian -----Original Message----- From: Wolfgang Grandegger [mailto:[EMAIL PROTECTED] Sent: Thursday, January 30, 2003 4:48 PM To: brian.auld at adic.com Cc: linuxppc-embedded at lists.linuxppc.org Subject: Re: Trying to use ELDK to build Ebony/440GP Hello this problem has already been reported some time ago. Search the linuxppc-embedded mailing list for kbuild_2_4_nostdinc. It's fixed in the DENX linuxppc_2_4_devel tree. Hope it helps. Wolfgang. On 01/30/2003 10:27 PM brian.auld at adic.com wrote: > I ran a checksum on the ELDK ISO image with the following result: > > [root at ppc-dev bauld]# mount -o loop eldk-ppc-linux-x86.ISO /mnt/eldk > [root at ppc-dev bauld]# cd /mnt/eldk/ > [root at ppc-dev eldk]# cd 2.0.2/ > [root at ppc-dev 2.0.2]# ls > ELDK_FIXOWNER ELDK_MAKEDEV etc install MD5SUM ppc_4xx ppc_4xxFP > ppc_74xx ppc_7xx ppc_82xx ppc_8xx README.html RPMS tools > [root at ppc-dev 2.0.2]# md5sum -c MD5SUM | grep -v OK > [root at ppc-dev 2.0.2]# > > -- Brian > > > -----Original Message----- > From: Matt Porter [mailto:porter at cox.net] > Sent: Thursday, January 30, 2003 4:17 PM > To: brian.auld at adic.com > Cc: porter at cox.net; linuxppc-embedded at lists.linuxppc.org > Subject: Re: Trying to use ELDK to build Ebony/440GP > > On Thu, Jan 30, 2003 at 01:02:59PM -0800, brian.auld at adic.com wrote: >> Matt, >> >> Thanks for the response. I was pretty surprised myself and to say the > least >> am not having a very good day. >> >> Regarding the linuxppc_2_4_devel build attempt, these were the steps I > took: >> >> In fact, I'm going to run it again on my linux box as I regurgitate the >> steps I previuosly took: >> >> Prerequisites: >> ============== >> - running RH8.0 >> - ELDK 2.0.2 installed with ppc_4xx tool chain (check) >> - linuxppc_2_4_devel obtained from monte vista mirror (check) >> (1) top-level Makefile hacked to read: >> - ARCH := ppc >> - CROSS_COMPILE = ppc_4xx- >> (1) make mrproper >> (2) make ebony_config >> (3) make oldconfig >> - I accept default(s) for about 10 options I'm prompted for. >> (4) make dep >> (5) make zImage >> >> When I run make zImage, I get the following error message: > >> /opt/eldk/usr/src/linuxppc_2_4_devel/include/linux/kernel.h:10: stdarg.h: > No >> such file or directory > > Interesting, it's not picking up stdarg.h from down in the gcc-lib/ > hierarchy. Probably an ELDK install problem...hopefully Wolfgang > is reading this thread since he should have a suggestion on what have > might gone wrong with your installation. > > Regards, > -- > Matt Porter > porter at cox.net > This is Linux Country. On a quiet night, you can hear Windows reboot. > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
