If you are using the serial port on the board then I would assume you have to use an srec format.
-----Original Message----- From: Aman [mailto:[EMAIL PROTECTED] Sent: Monday, August 19, 2002 8:37 PM To: linuxppc-embedded at lists.linuxppc.org Subject: Linux Image Hi All I have an rom monitor code without ethernet support running on PPC440GP. Is it possible to download a linux image to the board using the Kermit protocol. If so what type of linux image has to build for that. Thanking you in advance Regards Aman ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
