you really should contact MV support for this kind of stuff (if you have a support contract).
Ot is something with your basic setup. Did you add the /opt.../target directory to /etc/exports ? if so, did you restart the nfs server? is the nfs server running? Nils Hagge wrote: > > Hi, > > I try to run Hard Hat Linux from Montavista as described in the CDK 1.2 > manual on an RPX lite board. > Unfortunately, the installation procedure is only for hosts with Red Hat > Linux, I hoped this would work for SuSE, too. > > The problem has to do with the NFS filesystem. I can successfully download a > precompiled > Hard Hat Linux boot-image via TFTP and monitor this with the serial port. > > The following is the output over the serial port... > > target IP address : 824B8932 > target file name : rpxlite.srec > address bias : 0 > Starting tftp download: > inetARP(): OK > .1.2.4.8.16.32.64.128.256.512.1024.2048.4096.8192 > load_tftp(): OK > 1087283 data bytes, 13764 S-records, 2124 tftp blocks, 0 repeated blocks > start address = 00200000 > load_tftp_toMem(): OK > Transferring control to downloaded program > loaded at: 00200000 0020B1FC > relocated to: 00180000 0018B1FC > boart ata at: 001801C8 001801E4 > relocated to: 00200100 0020011C > zimage at: 00206000 0026A4C4 > avail ram: 0026B000 01000000 > > Linux/PPC load: root=/dev/nfs rw nfsroot=/opt/hardhat/devkit/ppc/8xx/target > Uncompressing Linux...done. > Now booting the kernel > Linux version 2.2.14 (root at rodan.mvista.com) (gcc version 2.95.2 19991030 > (2.95. > 3 prerelease/franzo)) #1 Tue Aug 8 02:01:27 PDT 2000 > Boot arguments: root=/dev/nfs rw nfsroot=/opt/hardhat/devkit/ppc/8xx/target > time_init: decrementer frequency = 240000000/60 > Calibrating delay loop... 63.69 BogoMIPS > Memory: 15152k available (740k kernel code, 456k data, 36k init) > [c0000000,c1000 > IP Protocols: ICMP, UDP, TCP > TCP: Hash tables configured (ehash 16384 bhash 16384) > Initializing RT netlink socket > Starting kswapd v 1.5 > CPM UART driver version 0.03 > ttyS00 at 0x0280 is a SMC > ttyS01 at 0x0380 is a SMC > pty: 256 Unix98 ptys configured > RAM disk driver initialized: 16 RAM disks of 4096K size > loop: registered device at major 7 > eth0: CPM ENET Version 0.2, 00:10:ec:00:1b:fb > PPP: version 2.3.7 (demand dialling) > TCP compression code copyright 1989 Regents of the University of California > PPP line discipline registered. > Sending BOOTP requests.... OK > IP-Config: Got BOOTP answer from 130.75.137.50, my address is 130.75.137.59 > Looking up port of RPC 100003/2 on 130.75.137.50 > Looking up port of RPC 100005/1 on 130.75.137.50 > VFS: Mounted root (NFS filesystem). > Freeing unused kernel memory: 36k init > Kernel panic: No init found. Try passing init= option to kernel. > Rebooting in 180 seconds.. > > ----snip---- > > The filesystem seems to be mounted, but it does not find any files in there > although the full "linux tree" is available. I also tried adding > init=/bin/init init=bin/init init=/opt/.../target/bin/init > to the boot arguments, but nothing helped. > > Do you know that problem or have an idea? Any help is welcome. Thank in > advance. > > Nils Hagge >>bN ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
