Hi,
I port a Linux 2.4.25 kernel on a MPC8560 custom board.
I don't use uboot but a custom boot on the board.
The console is mapped on SCC1 port.
CCSRBAR is mapped at 0xF8000000 and immr at 0xF8080000.
I open 2 TLBs on memory and a big TLB for all IOs included CSSRBAR.
Due to IO TLB, I don't io_remap cpm2_immr.
All things run fine until I launch the /sbin/init file from a nfs networK.
The file is right downloaded but seems not to run.
But the board is alived because I can press keys on console and receive
the echo and I can ping the board. It works.
I tried to use other files like /bin/sh, other busybox version, ...
The NFS file system seems to be right and well tested on a 8260 board
ie : the file system is 60x compiled without any special options for E500
core.
I also replaced the nfs by a ramdisk. Same results.
I don't know if uboot sets other things than TLBs to access IOs
and if my own boot is incomplete.
I don't know if cpm must be io_remapped instead of using TLBs.
Any ideas would be welcome.
Thanks
Laurent
loaded at: 00800000 0088C2A4
board data at: 00889130 00889194
relocated to: 0080530C 00805370
zimage at: 00805878 008882AF
avail ram: 0088D000 08000000
Linux/PPC load: devfs=mount ip=bootp root=/dev/nfs rw console=ttyS0,9600
Uncompressing Linux...done.
Now booting the kernel
Memory CAM mapping: CAM0=64Mb, CAM1=64Mb, CAM2=0Mb residual: 0Mb
motobooke_mmu.c110 index=0 virt=c0000000 phys=00000000 size=04000000
flags=82f pid=0
motobooke_mmu.c110 index=1 virt=c4000000 phys=04000000 size=04000000
flags=82f pid=0
motobooke_mmu.c110 index=2 virt=f0000000 phys=f0000000 size=10000000
flags=aaf pid=0
Linux version 2.4.25 (version gcc 3.2.3) #8 mer oct 13 17:30:00 CEST 2004
CPM_MAP_ADDR=F8080000
cpm2_immr=F8080000
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: devfs=mount ip=bootp root=/dev/nfs rw
console=ttyS0,9600
OpenPIC Version 1.2 (1 CPUs and 44 IRQ sources) at f8040000
OpenPIC timer frequency is 33.333333 MHz
time_init: decrementer frequency = 33.333333 MHz
Calibrating delay loop... 665.19 BogoMIPS
Memory: 128248k available (924k kernel code, 292k data, 52k init, 0k
highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x1
CPM UART driver version 0.01
ttyS0 on SCC1 at 0x8000, BRG1
pty: 256 Unix98 ptys configured
loop: loaded (max 8 devices)
eth0: Gianfar Ethernet Controller Version 1.0, 00:10:cd:42:2e:08
eth0: Running with NAPI disabled
eth0: 64/64 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.0, 00:10:cd:42:2e:09
eth1: Running with NAPI disabled
eth1: 64/64 RX/TX BD ring size
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
eth0: PHY is Marvell 88E1111S (1410cc1)
eth0: Auto-negotiation done
eth0: Full Duplex
eth0: Speed 100BT
eth0: Link is up
eth1: PHY is Marvell 88E1111S (1410cc1)
eth1: No link detected
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.1.65, my address is 192.168.1.98
IP-Config: Complete:
device=eth0, addr=192.168.1.98, mask=255.255.255.0,
gw=255.255.255.255,
host=192.168.1.98, domain=, nis-domain=(none),
bootserver=192.168.1.65, rootserver=192.168.1.65,
rootpath=/home/target/
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.1.65
Looking up port of RPC 100005/1 on 192.168.1.65
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 52k init
process.c619 sys_execve out error=0 filename=/sbin/init
free sibling
task PC stack pid father child younger older
init R current 0 1 0 7 (NOTLB)
[c0004510] [c000bf8c] [c0021650] [c002b51c] [c0169714] [c001e12c] [c001e2a8]
[c0
009ce0] [c02c9c30] [00000001]
keventd S 00000000 0 2 1 3 (L-TLB)
[c0004510] [c000bf8c] [c001c7b0] [c00042b8]
ksoftirqd_CPU S 00000000 0 3 1 4 2 (L-TLB)
[c0004510] [c000bf8c] [c0015324] [c00042b8]
kswapd S 00000000 0 4 1 5 3 (L-TLB)
[c0004510] [c000bf8c] [c002a044] [c00042b8]
bdflush S 00000000 0 5 1 6 4 (L-TLB)
[c0004510] [c000bf8c] [c000c61c] [c0037550] [c00042b8]
kupdated R 00000000 0 6 1 7 5 (L-TLB)
[c0004510] [c000bf8c] [c000bcd4] [c0037644] [c00042b8]
rpciod S 00000000 0 7 1 6 (L-TLB)
[c0004510] [c000bf8c] [c00de400] [c00042b8]
??? nothing more ???
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20041013/174442a4/attachment.htm
