Hi, in message <MBBBIOFIICDAPDMKHBDEKEDLCAAA.o_yahav at netvision.net.il> you wrote: > > I'm trying to port linux 2.2.14 on MPC860T and busybox as initrd.
2.2.14 is prehistoric stuff. Don't waste your time on all the bugs and problems that have been fixed since. > I have not seen any initializetion of the BCSR4 so i initialize it with the > value > that ppcboot uses , so the ENABLE led is on too. Ummm... What's BCSR4? If PPCBoot initializes it, why do you have to initialize it again? > The device isn't working even when i use ppcboot (i configured ppcboot to > use it). Sic! So get PPCBoot running first. > 1. Why there is no initializetion of BCSR4 in the original code? > 2. If BCSR4 must be initialized , what is the correct value? > 3. Is any one have a code that succeeded getting FEC device to work? Among all the things you don;t care to mention is which bard you're working on. My guess is that it simply never was really working in that old kernel version. As I said before: you are wasting your time. Use a current kernel. Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de The faster I go, the behinder I get. -- Lewis Carroll ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
