Hi all,

I've been workig with this for a while but have made no progress.
Today I got the latest XSysAce patch for kernel 2.6.17.1 and applied it to get 
clean code.  
I inherited the previous code from another developer.

My problem is that mounting the DOS partition always fails in a short time with 
a kernel oops.

ECAU-9999:# Oops: kernel access of bad area, sig: 11 [#1]                       
PREEMPT                                                                         
NIP: C00701C8 LR: C0070C18 CTR: 00000000                                        
REGS: c0391dd0 TRAP: 0300   Not tainted  (2.6.17.1)                             
MSR: 00021030 <ME,IR,DR>  CR: 22028082  XER: 0000000B                           
DAR: 00000000, DSISR: 00800000                                                  
TASK = c0373030[4] 'events/0' THREAD: c0390000                                  
GPR00: 00000080 C0391E80 C0373030 C02CAC00 C0E03000 C0E03154 00000000 C02CAC00  
GPR08: 00200200 00000000 00100100 00000000 00051A4B FFFFDE60 03BD4900 007FFF3B  
GPR16: 00400000 00000001 FFFFFFFF 03BCDC58 00000000 007FFF00 00000002 C0280000  
GPR24: C0363A10 0000000B 00000000 00000000 00000000 C02CAC00 C035ED20 C0E03000  
NIP [C00701C8] free_block+0x8c/0x138                                            
LR [C0070C18] drain_array+0xb8/0x124                                            
Call Trace:                                   

The setup:
My own build system.
Kernel 2.6.17.1 with lots of xilinx stuff, eth, i2c, xsysace.  Crosscompiled 
for PPC405.
Latest, clean XSysAce code.  mods:  major hardcoded to = 125.  Polled mode.
CF:  3 partitions,
1:  DOS FAT16
2:  Ext2  main
3:  Ext2  rescue

This build boots up fine, mounts a ext2 as root fine.  I can also mount the 
rescue partition with no problems.

Does anyone have any pointers of where I should look for problems?

My next step is to go and set it up for interrupt service and see if that 
changes anything.
 
Thanks,

Joe Robertson
[EMAIL PROTECTED]


CONFIDENTIALITY
This e-mail message and any attachments thereto, is intended only for use by 
the addressee(s) named herein and may contain legally privileged and/or 
confidential information. If you are not the intended recipient of this e-mail 
message, you are hereby notified that any dissemination, distribution or 
copying of this e-mail message, and any attachments thereto, is strictly 
prohibited.  If you have received this e-mail message in error, please 
immediately notify the sender and permanently delete the original and any 
copies of this email and any prints thereof.
ABSENT AN EXPRESS STATEMENT TO THE CONTRARY HEREINABOVE, THIS E-MAIL IS NOT 
INTENDED AS A SUBSTITUTE FOR A WRITING.  Notwithstanding the Uniform Electronic 
Transactions Act or the applicability of any other law of similar substance and 
effect, absent an express statement to the contrary hereinabove, this e-mail 
message its contents, and any attachments hereto are not intended to represent 
an offer or acceptance to enter into a contract and are not otherwise intended 
to bind the sender, Sanmina-SCI Corporation (or any of its subsidiaries), or 
any other person or entity.
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Reply via email to