Hi All,
I run Linux 2.6.21 (by Grant) on my Avnet Virtex-4 evaluation board
(ML403 like). When I load zIinux.elf
via jtag to the board it runs properly:
loaded at: 00400000 004F9138
board data at: 004F7120 004F7138
relocated to: 004040B4 004040CC
zimage at: 00404E59 004F6EE6
avail ram: 004FA000 01FFFFFF
Linux/PPC load: console=ttyUL0,9600 root=/dev/nfs rw
nfsroot=129.117.144.113:/opt/eldk41/ppc_4xx,tcp
ip=::::virtex4-mirek:eth0:dhcp panic=1
Uncompressing Linux...done.
Now booting the kernel
[0.000000] Linux version 2.6.21-rc6 ([EMAIL PROTECTED]) (gcc version 4.0.2) #11
Tue Aug 7 13:46:19 EST 2007
[0.000000] Xilinx ML403 Reference System (Virtex-4 FX)
.
.
.
.
It goes to the successful end.
I have build u-boot 1.2.0 with uart lite and temac support.
When I am trying to run uImage (build out of zImage) it does not run.
The steps I do are as following:
1. I build uImage withing the kernel tree (make uImage)
2. I load via jtag the u-boot 1.2.0
XMD% dow u-boot.elf
section, .text: 0x00800000-0x0081513c
section, .resetvec: 0x0081513c-0x00815140
section, .rodata: 0x00815140-0x00817ce0
section, .reloc: 0x00817d00-0x00818674
section, .data: 0x00818674-0x00818b08
section, .data.rel: 0x00818b08-0x00818b34
section, .data.rel.local: 0x00818b34-0x00818f6c
section, .u_boot_cmd: 0x00818f6c-0x008191dc
section, .bss: 0x00819200-0x0081dd04
3. I transfer uImage to the RAM memory of my Avnet board:
TFTP from server 129.129.144.113; our IP address is 129.129.144.157
Filename 'uImage'.
Load address: 0x1000000
Loading: #################################################################
#################################################################
################################################################
done
Bytes transferred = 991438 (f20ce hex)
4. I am trying to start the kernel
=> bootm 0x1000000
## Booting image at 01000000 ...
Image Name: Linux-2.6.21-rc6
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 991375 Bytes = 968.1 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
After all system hangs
I have tried to change the Load Address and Entry Point to 0x400000 (mkimage
-a 0x400000 -e 0x400000)
but the system hangs like in the first case.
my bootargs are:
console=ttyUL0,9600 root=/dev/nfs rw
nfsroot=129.117.144.113:/opt/eldk41/ppc_4xx,tcp
ip=::::virtex4-mirek:eth0:dhcp panic=1
Those bootargs where tested with zImage.elf and seem to be fine.
Does somebody has some suggestion?
Thank you in advance for any hint on that.
Mirek
--
View this message in context:
http://www.nabble.com/Linux-doesn-not-boot-from-u-boot-on-ML403-tf4335322.html#a12347049
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
