Hi, all
I have run linux-xilinx-26.git based on kernel 2.6.17.4 on ML403
successfully.
Then I used a temac patch from mvista (PAULUS)
The system hung while initializing from ramdisk after patched.
I use plb-temac v3.00a and hard_temac v3.00b, with EDK 9.1
The message printed is as follow. Any help would be appreciated.
--------------------------------------------------------------------------------------
loaded at: 00400000 0069013C
board data at: 0068E124 0068E13C
relocated to: 004050E8 00405100
zimage at: 004058B9 00527794
initrd at: 00528000 0068DE1A
avail ram: 00691000 04000000
Linux/PPC load: console=ttyS0,9600 root=/dev/ram rw
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.6.17-rc4-smp ([EMAIL PROTECTED]) (gcc version 3.3.1 (MontaVista
3
.3.1-3.0.10.0300532 2003-12-24)) #17 Wed Aug 29 16:36:51 CS
Xilinx ML403 Reference System (Virtex-4 FX)
Built 1 zonelists
Kernel command line: console=ttyS0,9600 root=/dev/ram rw
Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFE000
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 60604k available (1428k kernel code, 1352k data, 84k init, 0k highmem)
Security Framework v1.0.0 initialized
Capability LSM initial
Mount-cache hash table entries: 512
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1431k freed
seclvl: seclvl_init: seclvl: Failure registering with the kernel.
seclvl: seclvl_init: seclvl: Failure registering with primary security module.
seclvl: Error during initialization: rc = [-22]
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Macintosh non-volatile memory driver v1.1
Linux agpgart interface v0.101 (c) Dave Jones
SyncLink PC Card driver $Revision: 4.34 $
SyncLink PC Card driver $Revision: 4.34 $, tty major#253
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x40401003 (irq = 2) is a 16450
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
oprofile: using timer interrupt.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 84k init
-----------------------------------------------------------------------------------
System hung here.
linyao
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
