Hey Timur, As we talked about on IRC, I'm having problems getting the BDI-2000 to configure the MPC8349 when CFG_RESET_SOURCE is set to a hard coded config (Like 100 or 111).
Can you please confirm what I'm seeing on one of your boards? Steps to reproduce: 1. Set BDI config to override default RCW and initialize FLASH/RAM 2. Power up board and verify that BDI can read DDR and FLASH (using md commands) 3. Power down and remove jumpers A, B & C. 4. Power up and read DDR/FLASH again. At this point I get '# SAP: read access failed' from the BDI-2000. Thanks, g. -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. [EMAIL PROTECTED] (403) 399-0195 _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
