Hi,
You can write into flash from linux if you have mapped the flash in mtd
partition. you can open /dev/mtdx(partition that covers your flash
area) file and use normal read/write function calls to read/write from the
flash. Remember to erase the flash before attempting to write data. You can
refer sourcecode of mtd-utils.
Regards
Ratheesh
On 9/11/07, Yoni Levin <[EMAIL PROTECTED]> wrote:
>
> Hi , I have EN29LV640H flash (http://www.eonsdi.com/pdf/EN29LV640.pdf)
>
> On my mpc83xx board.
>
> How can I write data to flash from linux.?
>
> I guess it done with mtd , there is an example somewhere?
>
> Thanks.
>
>
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
