On 9/12/07, Domen Puncer <[EMAIL PROTECTED]> wrote: > On 12/09/07 12:16 -0400, Jon Smirl wrote: > > On 9/12/07, Grant Likely <[EMAIL PROTECTED]> wrote: > > > On 9/12/07, Jon Smirl <[EMAIL PROTECTED]> wrote: > > > > On 9/12/07, Robert Schwebel <[EMAIL PROTECTED]> wrote: > > > > > We have the OSELAS.BSP patch stack for the PCM030 working ontop of > > > > > Linus' git. It still uses an older version of the Bestcom patches, so > > > > > if > > > > > you do some work in that area, please keep me informed about your > > > > > progress. > > > > > > > > What is the best way to proceed? I need to be on current git since we > > > > are integrating a wireless driver that is tracking current git and the > > > > mac80211 work. > > > > > > > > I have Phytec (pcm030) and Efika hardware but I don't have a 5200lite. > > > > Our prototype hardware uses the pcm030 module on a custom baseboard. > > > > > > > > The best thing for me would be to get a FEC driver merged. That is the > > > > largest piece of code that is floating around. Getting that merged > > > > would give me a stable base to build future patches on. > > > > > > > > I'd also like to get support for the pcm030 (minus real-time) merged. > > > > That isn't a lot of code once FEC is in the kernel. > > > > > > > > Domen has posted this driver "[RFC PATCH v0.1] net driver: mpc52xx > > > > fec". I can work on breaking that up, but I don't have a 5200lite so I > > > > will have to port to pcm030. I don't want to start on this if someone > > > > else is already doing it. > > > > > > Sylvain's bestcomm patches need be cleaned up and resubmitted before > > > the next merge window opens. AFAIK, the code is pretty much ready, > > > and all the comments have been addressed. All that is required is the > > > final push to tidy the patchset and post to the list one more time. > > > Sylvain said that he was going to get this done last weekend, but I > > > haven't heard back from him yet. > > > > > > Sylvain, if you need help, please let me know. I'll happily take on > > > the last bit of tidy work if that's what is needed to be finished > > > before the merge window. (And it needs to be ready *before*, not > > > during if I'm judging the prevailing winds correctly). > > > > Is a version of this patch set that has been rebased to current git > > available? If I have a starting point I can begin working on the > > pcm030 support. pcm030 already works, it is just out of tree. > > I think these patches are "latest": > http://www.246tnt.com/mpc52xx/dev_full/ > Applying them to -git should not be a problem, I don't remember anything > tricky, but if you have problems, I can send you patches agains mainline. > > BTW. I posted FEC patch v2, which will hopefully be merged.
I just booted your code successfully on current Linus git with a Phytec pcm030. There is a timeout issue that is probably related to the specific Ethernet PHY chip used on the pcm030. I'm looking into it now. [ 1.313708] net eth0: attached phy 0 to driver Generic PHY [ 2.320013] Sending DHCP requests ...... timed out! [ 81.968863] IP-Config: Retrying forever (NFS root)... [ 82.477527] net eth0: attached phy 0 to driver Generic PHY [ 83.487809] Sending DHCP requests .<6>PHY: f0003000:00 - Link is Up - 100/Full [ 86.323795] ., OK [ 88.579802] IP-Config: Got DHCP answer from 192.168.1.200, my address is 192.168.1.5 [ 88.587923] IP-Config: Complete: > > > Domen > > > > > > > > > > > Cheers, > > > g. > > > > > > > > -- > > > > Jon Smirl > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > -- > > > Grant Likely, B.Sc., P.Eng. > > > Secret Lab Technologies Ltd. > > > [EMAIL PROTECTED] > > > (403) 399-0195 > > > > > > > > > -- > > Jon Smirl > > [EMAIL PROTECTED] > -- Jon Smirl [EMAIL PROTECTED] _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
