Hi all,
I am trying to boot TQM5200 with linux 2.6 kernel. i am using latest version of
linux and u-boot from denx. And compiled with ELDK4.1
i use dtc compiler with following command:
dtc -O dtb -o tqm5200.dtb -b 0 tqm5200.dts
Booting process gives following error and reset the board.
WARNING: could not create /chosen FDT_ERR_NOSPACE.
ERROR: /chosen node create failed - must RESET the board to recover.
Regards.
Using FEC ETHERNET device
TFTP from server 10.18.2.83; our IP address is 10.18.5.44
Filename 'uImage'.
Load address: 0x200000
Loading: #################################################################
####################################
done
Bytes transferred = 1473038 (167a0e hex)
Using FEC ETHERNET device
TFTP from server 10.18.2.83; our IP address is 10.18.5.44
Filename 'tqm5200.dtb'.
Load address: 0x400000
Loading: #
done
Bytes transferred = 3816 (ee8 hex)
## Booting image at 00200000 ...
Image Name: Linux-2.6.23-rc6-gf695e369
Created: 2007-09-19 1:31:43 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1472974 Bytes = 1.4 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Booting using the fdt at 0x400000
WARNING: could not create /chosen FDT_ERR_NOSPACE.
ERROR: /chosen node create failed - must RESET the board to recover.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
