In message <[EMAIL PROTECTED]> you wrote: > > I want to cross compile a free software library with ELDK 3.1.1 for > powerpc. I have ELDK installed under directory /opt and my system and > PATH is set properly. I have a few points to be clarified:
May I recommend that, as a first step, you read the documentation? > - For a cross compilation with ELDK how can we be sure that config.h > file for a software packet is generated properly? I mean, how can we You cannot be sure. You will always have to check. > be sure that ELDK components is checked instead of our host linux > system for generating a config.h file by the configure script? RTFM. See especially the two bullets at http://www.denx.de/wiki/view/DULG/ELDKRebuildingComponents#Section_3.7.2. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Wisdom is one of the few things that looks bigger the further away it is. - Terry Pratchett, _Witches Abroad_ _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
