On Tue, Sep 18, 2007 at 09:49:05AM -0500, Scott Wood wrote: > On Tue, Sep 18, 2007 at 11:04:27AM +0200, fabien wrote: > > I'm new in embedded system and i need some informations ... > > Which tool could i use to connect my board througt the JTAG connector ? > > My board is a custom board with a MPC875, and flash is S29GL032M. The probe > > that can i use is > > a PowerPC BDM windriver Probe 2. > > I'm looking for a tool running on linux. > > The Abatron BDI2000 works well with Linux.
Indeed, but i was not able to put my MPC875 board in halt state once linux started running. I hear Vitaly has had similar problems too. Wolfgang said it worked though, so this may be due to a hardware quirk or some misconfiguration or something. I am not really a bdi config file expert myself. Friendly, Sven Luther _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
