Juergen wrote: > >Pedro, > >On Wednesday 19 September 2007 10:54, Pedro Luis D. L. wrote: >> I´m also working with a Phytec pcm030, but I can´t get it booted... >> Which kernel are you using? >> I tried to apply the 7 bestcomm patches from Sylvain and patch over these >> with this new ones that Domen released. The base kernel I´m using is >> 2.6.22.6 from kernel.org. >> Although I used the patch that creates pcm030.c in arch/platforms/52xx/ and >> compiled using this file, it gets halted at booting time. >> >> Bytes transferred = 5091 (13e3 hex) >> ## Booting image at 00500000 ... >> Image Name: Linux-2.6.22.6 >> Created: 2007-09-19 8:53:02 UTC >> Image Type: PowerPC Linux Kernel Image (gzip compressed) >> Data Size: 1196911 Bytes = 1.1 MB >> Load Address: 00000000 >> Entry Point: 00000000 >> Verifying Checksum ... OK >> Uncompressing Kernel Image ... OK >> Booting using flat device tree at 0x400000 >> >> (No more output and boot is halted) > >Check your oftree! Most of the time this behaviour means its a wrong oftree in >use.
I´m using an specific pcm030.dts oftree that works for the 2.6.20 kernel. I´m not quite familiar with the oftree stuff, but I thought it should work also for the 2.6.22.6. Is there any other dts file? Where can I find it? Pedro. PD: Sorry. I sent the previous message to Jon, Domen and someone else too besides the list. I had some problems with the browser... Even sent twice the message :-( >Juergen > >-- >Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de >Pengutronix - Linux Solutions for Science and Industry > Handelsregister: Amtsgericht Hildesheim, HRA 2686 > Vertretung Sued/Muenchen, Germany > Phone: +49-8766-939 228 | Fax: +49-5121-206917-9 > _________________________________________________________________ Llama a tus amigos de PC a PC: ¡Es GRATIS! http://get.live.com/messenger/overview _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
