Thanks, i'll try the both ways. I'm still afraid of killing factory UBoot without BDI2000 or working X30 jumper :-)
On 9/19/07, Grant Likely <[EMAIL PROTECTED]> wrote: > On 9/19/07, Leopold Stotch <[EMAIL PROTECTED]> wrote: > > Thank you for the answer, Grant ! > > I knew nothing about port_config register before your answer :-( > > I haven't changed any processor registers yet > > because i'm still searching where i can do this. > > Can you tell me, is it UBoot specific or kernel specific or both ? > > And i already know about MPC5200's device tree in 2.6.x kernel but not in > > 2.4.x... > > It is best to do it in u-boot; but if you cannot (or don't want to) > change your u-boot image, then you can fix up the port_config value > during early kernel boot. > > Cheers, > g. > > -- > Grant Likely, B.Sc., P.Eng. > Secret Lab Technologies Ltd. > [EMAIL PROTECTED] > (403) 399-0195 > -- Best regards, Leopold Stotch _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
