Hi,
Can I connect the c67x00 driver directly to the USB bus?
I have a device, a virtex4 fpga, with no PCI bus. I have a fpga bus to the
cypress chip (c67300).
I have compiled the core USB code (but no uhci ohci).
It loads ok, detects and loads 2 host sies. I get interrupts for all that (and
the 3 mailbox puts I do).
But I was just connecting to 'platfom_bus_type'. After all that I get no more
interrupts.
The kernel drivers textbook doesn't quite match anymore, links to .hotplug in
structs have moved.
Pointers to websites and papers appreciated.
I am using a custom kernel tree, 2.6.17.1, some of Grant Likely stuff is
already in there (from the original developer on this project).
Thanks,
Joe Robertson
[EMAIL PROTECTED]
CONFIDENTIALITY
This e-mail message and any attachments thereto, is intended only for use by
the addressee(s) named herein and may contain legally privileged and/or
confidential information. If you are not the intended recipient of this e-mail
message, you are hereby notified that any dissemination, distribution or
copying of this e-mail message, and any attachments thereto, is strictly
prohibited. If you have received this e-mail message in error, please
immediately notify the sender and permanently delete the original and any
copies of this email and any prints thereof.
ABSENT AN EXPRESS STATEMENT TO THE CONTRARY HEREINABOVE, THIS E-MAIL IS NOT
INTENDED AS A SUBSTITUTE FOR A WRITING. Notwithstanding the Uniform Electronic
Transactions Act or the applicability of any other law of similar substance and
effect, absent an express statement to the contrary hereinabove, this e-mail
message its contents, and any attachments hereto are not intended to represent
an offer or acceptance to enter into a contract and are not otherwise intended
to bind the sender, Sanmina-SCI Corporation (or any of its subsidiaries), or
any other person or entity.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
