In message <[EMAIL PROTECTED]> you wrote: > > Specifically, I have followed the procedure in section "3.7. > Rebuilding ELDK Components". First I have installed source RPMs and > then rebuilt the binary target RPM. However, as I have followed the > compiler messages I recognized that host gcc is called instead of > cross gcc. > > Considering that my PATH was set following the advice in section "3.7. > Rebuilding ELDK Components" as "<ELDK_root>/usr/ppc-linux/bin" > directory is before "/usr/bin" what could be the problem?
If you really followed that advice then please explain how the native gcc could be called at all because the cross compiler will always be found first in the PATH? I recommend checking the documentation again and following it step by step. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "This is a test of the Emergency Broadcast System. If this had been an actual emergency, do you really think we'd stick around to tell you?" _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
