On 10/17/07, aauer1 <[EMAIL PROTECTED] > wrote: > > > Grant Likely-2 wrote: > > > > On 10/17/07, aauer1 <[EMAIL PROTECTED] > wrote: > > > Now, I know that the kernel boots but I don't get an > output with my > > > Xilinx > > > UartLite module. Are there some kernel modules which must be > activated?? > > > Btw. I have used the Linux-2.6-virtex kernel from > > > http://git.secretlab.ca/git/ and another Kernel (2.6.23 from > kernel.org) > > > - > > > both with the same result. > > > > Post the output of __log_buf here please. > > > > > > Here is my dump of the __log_buf: > ====================== > <5 >[ 0.000000] Linux version 2.6.23-rc2 > ([EMAIL PROTECTED]) (gcc version 4.0.0 (DENX ELDK 4.1 > 4.0 > .0)) #8 Wed Oct 17 20:05:28 CEST 2007 > <6 >[ 0.000000] Xilinx ML403 Reference System (Virtex-4 FX) > <7 >[ 0.000000] Entering add_active_range(0, 0, 16384) 0 > entries of 256 > used > <4 >[ 0.000000] Zone PFN ranges: > <4 >[ 0.000000] DMA 0 - > 16384 > <4 >[ 0.000000] Normal 16384 - > 16384 > <4 >[ 0.000000] Movable zone start PFN for each node > <4 >[ 0.000000] early_node_map[1] active PFN ranges > <4 >[ 0.000000] 0: 0 - > 16384 > <7 >[ 0.000000] On node 0 totalpages: 16384 > <7 >[ 0.000000] DMA zone: 128 pages used for memmap > <7 >[ 0.000000] DMA zone: 0 pages reserved > <7 >[ 0.000000] DMA zone: 16256 pages, LIFO batch:3 > <7 >[ 0.000000] Normal zone: 0 pages used for memmap > <7 >[ 0.000000] Movable zone: 0 pages used for memmap > <4 >[ 0.000000] Built 1 zonelists in Zone order. Total > pages: 16256 > <5 >[ 0.000000] Kernel command line: console=ttUL0 > root=/dev/xsysace2 rw
try the command line bootargs console=ttyUL0,boardrate root=/dev/xsysace2 rw you must make sure that you have the xsysace2 device, or you can take a test using ramdisk.i think it will run well
_______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
