the problem has solved ,it is the serial cpm dug,but i don't know where it is. i used the denx linux tree,it works fine,thank you for you help. thank you
keng_629 2007-10-19 发件人： Scott Wood 发送时间： 2007-10-18 01:32:05 收件人： Dan Malek 抄送： linuxppc-embedded@ozlabs.org 主题： Re: mpc 860 boot linux2.6.23 problem Dan Malek wrote: > > On Oct 17, 2007, at 11:31 AM, Scott Wood wrote: > > > I just pulled Wolfgang's latest u-boot tree, and I don't see > > any fdt > > or ft_ calls in cpu/mpc8xx, nor in any 8xx board that I > > recognize. > > The STx XTc 885 is supported and was used for > a majority of the FT development in u-boot. I > just built it a few months ago, it worked fine, so > if it isn't working today the changes should be > minimal to bring it up to date. OK, that wasn't a board I recognized. :-P Still, most 8xx boards are not yet converted AFAICT. Not that it'd be hard to do so, but it might be a bit misleading to say "upgrade u-boot and get device tree support". :-) -Scott _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
_______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
