Wolfgang Grandegger wrote: > Grant Likely wrote: >> On 10/25/07, Wolfgang Grandegger <[EMAIL PROTECTED]> wrote: >>> Hello, >>> >>> The access to PCI memory space does not to work (I allways read 0xff) on >>> my Icecube-Eval-Board. Are there any known issues/bugs with using the >>> PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I >>> realized, that CONFIG_PCI is not set in the default configuration. >> arch/ppc or arch/powerpc? >> >> I'm not a PCI expert, but I just fired up my Lite5200 with a couple of >> eth adapters plugged in and the devices are usable. This is a >> 2.6.24-rc1 arch/powerpc kernel. > > I'm using a 2.6.23 arch/powerpc kernel. And my eepro100 card does not > work either: > > e100: probe of 0000:00:18.0 failed with error -11 > > It looks like that 2.6.23 needs some more patches.
Indeed, it works with 2.6.24-rc1: e100: eth0: e100_probe: addr 0xa0000000, irq 16, MAC addr 00:0e:0c:74:8c:f2 Wolfgang. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
