Hi all, I am trying to use mpc860 as i2c-SLAVE. Kernel, I am using is Linux-2.4.4, which I can't change due to some reasons.
I am able to do I2C read/write operations on mpc8xx-i2c slave only after re-insmoding my driver module (i2c-algo-8xx.c, and adapter layer drive, code I took form i2c-rpx/r360.c ). The issue I am facing is when I insmod i2c-driver on fresh Linux boot, any i2c-mpc860 as slave read/write operation gives me busy status (which is for Rx BD not available) in Controller's i2c Event Registers. When I get busy status I have to do force_close() and re-init of bd, then only busy status goes off. I tried calling cpm_iic_init(); twice while __init but with no change in busy status. After some initial try, i2c slave write works but i2c read gives no data to the master. After re-insmoding driver, read/write works with some times (1 out of 15 times) i2c-read failing. But still I can't understand why busy is coming.... Any help or suggestions are highly appreciated. thanks, Ankur Maheshwari _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
