Hi, Robert! Just one more short note... My good - vs. - bad dmesg output:
good 2.6.21-rc5-git: > Gianfar MII Bus: probed > eth0: Gianfar Ethernet Controller Version 1.2, 00:ww:xx:yy:zz:dd > eth0: Running with NAPI enabled > eth0: 256/256 RX/TX BD ring size > eth1: Gianfar Ethernet Controller Version 1.2, 00:ww:xx:yy:zz:dd > eth1: Running with NAPI enabled > eth1: 256/256 RX/TX BD ring size > eth2: Gianfar Ethernet Controller Version 1.2, 00:ww:xx:yy:zz:dd > eth2: Running with NAPI enabled > eth2: 256/256 RX/TX BD ring size > Marvell 88E1101: Registered new driver > Marvell 88E1111: Registered new driver > Marvell 88E1145: Registered new driver (I've wiped out my MAC) bad 2.6.24-rc2-git: < Gianfar MII Bus: probed < eth0: Gianfar Ethernet Controller Version 1.2, 00:00:00:00:00:00 < eth0: Running with NAPI enabled < eth0: 256/256 RX/TX BD ring size < eth1: Gianfar Ethernet Controller Version 1.2, 00:00:00:00:00:00 < eth1: Running with NAPI enabled < eth1: 256/256 RX/TX BD ring size < eth2: Gianfar Ethernet Controller Version 1.2, 00:00:00:00:00:00 < eth2: Running with NAPI enabled < eth2: 256/256 RX/TX BD ring size The MACs are all 00 here. The PHY drivers don't get registered. (What happened to CONFIG_NETDEV_1000 in the newer kernels?) How is your mileage? Next round... tomorrow, regards, Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
