This is the reply that i got from the Freescale :- -------------------------------------------------------------------------- Reply from Freescale In reply to your Service Request SR 1-403672820:
We recommend using the MPC8272 USB controller. We know that customers use the MPC8272/MPC8248 USB controller. You can find also USB drivers in Linux software for the MPC8272. For example Linux BSP for Freescale MPC8272ADS contains USB slave driver (http://www.freescale.com/webapp/sps/site/overview.jsp?nodeId=0127260061033202A5). Linux USB driver is available in the Arabella Linux (http://www.arabellasw.com/products-pow2.php). If the MPC8272 is USB host, the transaction-level interface can be used. Note: The MPC8272 USB does not support high-speed mode. It can operate on low-speed mode (1.5MHz) or full-speed mode (12MHz). ------------------------------------------------------------------------------------------ Can any body comment on this and help me how to start with and requirement is this :- I need a USB Hub to be connected to the PPC8248 board with Montavista Linux 2.6.10 on it what shall i do to achive it ....????The challenges you already know Hoping for the the Help ... Misbah khan wrote: > > Hi all, > > I am using a 8248 processor which has a USB controller and i need to > connect a USB Hub to it, iam using Montavista Linux .I need to know that > what are the support i need form Montavista or Open source to have an > interface with Usb hub. ??? > > Is there any driver that we need to make if so what type ??? > > --misbah <>< > -- View this message in context: http://www.nabble.com/Firmware-Support-for-USB-Hub-tf4850180.html#a13908701 Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
