lock up the location of the __log_buf in the System.map and check if errormessages are stored there in the memory. check the console device. it must be /dev/ttyULx
Georg [EMAIL PROTECTED] wrote: > We built a design for ML405 using EDK 9.1.02. EDK also > creates linux drivers for MontaVista Pro 4.0.1 (2.6.10). > The drivers were copied to a clean copy of Pro 4.0.1 and the > kernel was built. When we downloaded the kernel to the target > and ran it, we got exception. We didn't get any messages on > the hyper terminal. > We used Tri-Mode Ethernet and UART lite. > MontaVista checked the integration of EDK 8.2 with ML403. > Can you help ? > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > ------------------------------------------------------------------- ------------------------------------------------------------------- Forschungszentrum Jülich GmbH 52425 Jülich Sitz der Gesellschaft: Jülich Eingetragen im Handelsregister des Amtsgerichts Düren Nr. HR B 3498 Vorsitzende des Aufsichtsrats: MinDirig'in Bärbel Brumme-Bothe Geschäftsführung: Prof. Dr. Achim Bachem (Vorsitzender), Dr. Ulrich Krafft (stellv. Vorsitzender), Dr. Sebastian M. Schmidt ------------------------------------------------------------------- ------------------------------------------------------------------- _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
