On Nov 26, 2007, at 12:26 PM, robert lazarski wrote: > Hi all, I'm using a recent pull of the paulus tree 2.6.24RC2 on my > custom 85xx board. I'm trying to test my PCI1, PCI2 and PCIe . My > device tree for PCI is: > > [EMAIL PROTECTED] { > compatible = "fsl,mpc8540-pci"; > device_type = "pci"; > interrupt-map-mask = <f800 0 0 7>; > interrupt-map = < > > /* IDSEL 0x11 J17 Slot 1 */ > 8800 0 0 1 &mpic 2 1 > 8800 0 0 2 &mpic 3 1 > 8800 0 0 3 &mpic 4 1 > 8800 0 0 4 &mpic 1 1 > > /* IDSEL 0x12 J16 Slot 2 */ > > 9000 0 0 1 &mpic 3 1 > 9000 0 0 2 &mpic 4 1 > 9000 0 0 3 &mpic 2 1 > 9000 0 0 4 &mpic 1 1>; > > interrupt-parent = <&mpic>; > interrupts = <18 2>; > bus-range = <0 ff>; > ranges = <02000000 0 80000000 80000000 0 20000000 > 01000000 0 00000000 e2000000 0 00100000>; > clock-frequency = <3f940aa>; > #interrupt-cells = <1>; > #size-cells = <2>; > #address-cells = <3>; > reg = <8000 1000>; > }; > > [EMAIL PROTECTED] { > compatible = "fsl,mpc8540-pci"; > device_type = "pci"; > interrupt-map-mask = <f800 0 0 7>; > interrupt-map = < > > /* IDSEL 0x11 J17 Slot 1 */ > 8800 0 0 1 &mpic 2 1 > 8800 0 0 2 &mpic 3 1 > 8800 0 0 3 &mpic 4 1 > 8800 0 0 4 &mpic 1 1 > > /* IDSEL 0x12 J16 Slot 2 */ > > 9000 0 0 1 &mpic 3 1 > 9000 0 0 2 &mpic 4 1 > 9000 0 0 3 &mpic 2 1 > 9000 0 0 4 &mpic 1 1>; > > interrupt-parent = <&mpic>; > interrupts = <18 2>; > bus-range = <0 ff>; > ranges = <02000000 0 c0000000 c0000000 0 20000000 > 01000000 0 00000000 e2800000 0 00100000>; > clock-frequency = <3f940aa>; > #interrupt-cells = <1>; > #size-cells = <2>; > #address-cells = <3>; > reg = <c000 1000>; > }; > > [EMAIL PROTECTED] { > compatible = "fsl,mpc8548-pcie"; > device_type = "pci"; > #interrupt-cells = <1>; > #size-cells = <2>; > #address-cells = <3>; > reg = <a000 1000>; > bus-range = <0 ff>; > ranges = <02000000 0 a0000000 a0000000 0 20000000 > 01000000 0 00000000 e3000000 0 00100000>; > clock-frequency = <1fca055>; > interrupt-parent = <&mpic>; > interrupts = <19 2>; > interrupt-map-mask = <f800 0 0 7>; > interrupt-map = < > /* IDSEL 0x0 */ > 0000 0 0 1 &mpic 0 1 > 0000 0 0 2 &mpic 1 1 > 0000 0 0 3 &mpic 2 1 > 0000 0 0 4 &mpic 3 1 > >; > };
Take a look at the device trees in the kernel source. You'll see we moved PCI around so its at the root level. Not sure if that's your issue. > I see all the above in /proc/device-tree/[EMAIL PROTECTED] when booting > the kernel. I double checked my memory mapping in u-boot and it > appears to match my device tree. Yet I don't see any pci here: > > root:~> cat /proc/iomem > e0004500-e0004507 : serial > e0004600-e0004607 : serial > e0024000-e0024fff : ethernet > e0024520-e002453f : mdio > e0025000-e0025fff : ethernet > e0026000-e0026fff : ethernet > e0027000-e0027fff : ethernet > > cat /proc/bus/pci/devices shows nothing though I have a card in PCI1, > and all I see from dmesg is "PCI: Probing PCI hardware" . Any ideas? It seems like its not even really probing or finding the buses. Can you post what your board/platform code looks like? - k _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded