Hi, I have a MPC7447A board running linux 2.6.21. I want to get the physical RAM layout from /proc/iomem, but it is not proper as of x86 platform. Here is the output of my target's /proc/iomem.
[EMAIL PROTECTED] ~]# cat /proc/iomem 80000000-87ffffff : PCI hose 0 MEM Space 0 86900000-869fffff : 0000:00:02.2 86a00000-86afffff : 0000:00:02.2 . . 87f00000-87f7ffff : 0000:00:01.0 87ffffc0-87ffffff : 0000:00:01.0 88000000-8fffffff : PCI hose 1 MEM Space 0 8d3fe000-8d3fefff : 0001:01:05.2 8d3ff000-8d3fffff : 0001:01:05.1 . . 8e000000-8effffff : 0001:01:04.0 8f800000-8fffffff : 0001:01:04.0 fbe02000-fbe03fff : ethernet shared base fbe04000-fbe04c17 : sdma 0 base fbe04000-fbe04c17 : sdma_regs fbe06000-fbe06c17 : sdma 1 base fbe06000-fbe06c17 : sdma_regs fbe08000-fbe08037 : mpsc 0 base fbe08000-fbe08037 : mpsc_regs fbe09000-fbe09037 : mpsc 1 base fbe09000-fbe09037 : mpsc_regs fbe0b200-fbe0b207 : brg 0 base fbe0b200-fbe0b207 : brg_regs fbe0b208-fbe0b20f : brg 1 base fbe0b208-fbe0b20f : brg_regs fbe0b400-fbe0b40b : mpsc routing base fbe0b400-fbe0b40b : mpsc_routing_regs fbe0b800-fbe0b883 : sdma intr base fbe0b800-fbe0b883 : sdma_intr_regs fbe0c000-fbe0c01f : mv64xxx i2c base fbe0c000-fbe0c01f : mv64xxx_i2c adapter ff000000-ffffffff : physmap-flash.0 ff000000-ffffffff : physmap-flash.0 Can you please anybody tell me how to interpret this to get physical RAM addresses. Or is there any patch available to get the details of System RAM from /proc/iomem ?? Thanks in advance, Rajasekaran.P
_______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
