Hi, Alessandro! Thank you for your quick response... I'll just follow your ideas and provide you with the dmesg output ASAP.
If you are online for some more time, I will accelerate this debugging session... Just let me know. Alessandro Zummo schrieb: > On Wed, 28 Nov 2007 19:25:00 +0100 > Clemens Koller <[EMAIL PROTECTED]> wrote: > >> Well, as already mentioned, I have problems to get my DS1337 RTC on I2C >> on my MPC8540(ads like) PowerPC working properly on >> latest 2.6.24-rc2-ge6a5c27f kernels. A paulus.git 2.6.21-rc5-g9a5ee4cc >> as well as a 2.6.22-rc6-gb75ae860 is working fine. >> (mainstream's console is broken, so cannot test these, yet.) >> >> >> My guess is that the new rtc-lib's RTC_DRV_DS1307 support is still broken >> and it also breaks the deprecated SENSORS_DS1337. :-( > > mmm. I've been told it should work ;) > >> Here is a snippet from my .config which is similar among my kernels. >> CONFIG_GEN_RTC=y > > this one must be deselected. > >> CONFIG_SENSORS_DS1337=y >> CONFIG_SENSORS_DS1374=y > > ditto. Will do. > >> DEV: registering device: ID = '0-0068' >> bus i2c: add device 0-0068 >> bound device '0-0068' to driver 'ds1337' > > maybe the wrong driver is kicking in here. > the fact that there is no rtc class > related output in dmesg should and that > there is no /dev/rtc0 could be a sign that the whole class > is not going in. > > do you have full dmesg? Not a full one from the 2.6.24 right now... But I'll disable above stuff and get you a full one. (in 5..10 minutes). Regards, Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
