Am Donnerstag, 6. Dezember 2007 schrieb Wolfgang Denk: > In message <[EMAIL PROTECTED]> you wrote: > > Am Dienstag, 4. Dezember 2007 schrieb Wolfgang Denk: > > <...> > > > I'm afraid "normal" here still means arch/ppc - hopefully for not > > > long any more. Note: a matching Xenomai patch for arch/ppc will be in > > > Xenomai 2.4 when it comes out in a few days. > > Thanks a lot for your explanation. I took > > ksrc/arch/powerpc/patches/adeos-ipipe-2.6.23-ppc-1.6-00.patch > > from the xenomai trunk and was able to compile and boot successfully > > the yosemite board (using ARCH=ppc). Will try the sequoaia board tomorrow. > > > > I hope that this is a good starting point to get my custom PPC440EPx board > > into shape. I think once the arch/powerpc will work for PPC440 it should > > not > > be a lot of work to port it from ppc -> powerpc. > > Actually the arch/powerpc tree is working fine here, too. > > You might have been unlucky and cloning / pulling our tree at the > wrong time; we had a stale DENX-v2.6.23.9 tag in there for some time; > unfortunately the fix doesn't propagate as your side thinks it > already has a valid tag. > > Please either "rm .git/refs/tags/DENX-v2.6.23.9" and pull again, or > throw away the whole tree and clone again. Sorry for the incon- > venience. And please let me know if this helps (it should). After following your receipt I recompiled and booted the sequoia board. Everything seems to work.
Thank you again for your tip. You are always very helpful. Best regards, Niklaus Giger _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
