Hi again In which xparams* files should i look for the right definition? In the xparameters.h from the BSP I can't find it, it looks like this: ------------------------------------------------------------------- /* * include/asm-ppc/xparameters.h * * This file includes the correct xparameters.h for the CONFIG'ed board * * Author: MontaVista Software, Inc. * [EMAIL PROTECTED] * * 2004 (c) MontaVista Software, Inc. This file is licensed under the terms * of the GNU General Public License version 2. This program is licensed * "as is" without any warranty of any kind, whether express or implied. */
#include <linux/config.h> #if defined(CONFIG_XILINX_ML300) #include <platforms/4xx/xparameters/xparameters_ml300.h> #endif #if defined(CONFIG_XILINX_ML40x) #include <platforms/4xx/xparameters/xparameters_ml40x.h> #endif #if defined(CONFIG_MEMEC_2VPX) #include <platforms/4xx/xparameters/xparameters_2vpx.h> #endif /* * A few reasonable defaults for the #defines which could be missing depending * on the IP version or variant (e.g. OPB vs PLB) */ #ifndef XPAR_EMAC_0_CAM_EXIST #define XPAR_EMAC_0_CAM_EXIST 0 #endif #ifndef XPAR_EMAC_0_JUMBO_EXIST #define XPAR_EMAC_0_JUMBO_EXIST 0 #endif #ifndef XPAR_EMAC_0_TX_DRE_TYPE #define XPAR_EMAC_0_TX_DRE_TYPE 0 #endif #ifndef XPAR_EMAC_0_RX_DRE_TYPE #define XPAR_EMAC_0_RX_DRE_TYPE 0 #endif #ifndef XPAR_EMAC_0_TX_INCLUDE_CSUM #define XPAR_EMAC_0_TX_INCLUDE_CSUM 0 #endif #ifndef XPAR_EMAC_0_RX_INCLUDE_CSUM #define XPAR_EMAC_0_RX_INCLUDE_CSUM 0 #endif #ifndef XPAR_EMAC_1_CAM_EXIST #define XPAR_EMAC_1_CAM_EXIST 0 #endif #ifndef XPAR_EMAC_1_JUMBO_EXIST #define XPAR_EMAC_1_JUMBO_EXIST 0 #endif #ifndef XPAR_EMAC_1_TX_DRE_TYPE #define XPAR_EMAC_1_TX_DRE_TYPE 0 #endif #ifndef XPAR_EMAC_1_RX_DRE_TYPE #define XPAR_EMAC_1_RX_DRE_TYPE 0 #endif #ifndef XPAR_EMAC_1_TX_INCLUDE_CSUM #define XPAR_EMAC_1_TX_INCLUDE_CSUM 0 #endif #ifndef XPAR_EMAC_1_RX_INCLUDE_CSUM #define XPAR_EMAC_1_RX_INCLUDE_CSUM 0 #endif #ifndef XPAR_GPIO_0_IS_DUAL #define XPAR_GPIO_0_IS_DUAL 0 #endif #ifndef XPAR_GPIO_1_IS_DUAL #define XPAR_GPIO_1_IS_DUAL 0 #endif #ifndef XPAR_GPIO_2_IS_DUAL #define XPAR_GPIO_2_IS_DUAL 0 #endif #ifndef XPAR_GPIO_3_IS_DUAL #define XPAR_GPIO_3_IS_DUAL 0 #endif #ifndef XPAR_GPIO_4_IS_DUAL #define XPAR_GPIO_4_IS_DUAL 0 #endif ---------------------------------------------------- Did I something wrong in the edk Projekt, or are there other xparameters where I must look? Greetings & THX _______________________________________________________________________ Jetzt neu! Schützen Sie Ihren PC mit McAfee und WEB.DE. 30 Tage kostenlos testen. http://www.pc-sicherheit.web.de/startseite/?mc=022220 _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
