>>Documentation/powerpc/booting-without-of.txt to find out what is >>expected in the device tree.
Is there any more information on how the "of_*" ( e.g. of_node_put , of_find_node_by_type ) functions should be implemented in the "arch/powerpc/platforms/myplatform/myboard_setup.c" file or is the documentation the existing "*.c" c files under arch/powerpc/platforms ? Since I have a 82xx board I assume that "myboard_setup.c" file shall be put under arch/powerpc/platforms/82xx. Cheers // Matias Grant Likely skrev: > On 1/11/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > >> Hi, >> I want to port a board ( WRS SBC8265 ) from the PPC branch to the POWERPC >> branch in the Linux Kernel -- do you have any good starting points that >> describes what I need to pay attention to? >> >> I've already made a port of U-boot-1.3.1 and enabled CONFIG_OF_LIBFDT. >> >> So I need to create a DTS file, compile it with the DTC compiler and port >> the current PPC branch to the POWERPC branch to my understanding. >> > > Yes, you're exactly right. Use one of the dts files in > arch/powerpc/boot/dts as a starting point and read > Documentation/powerpc/booting-without-of.txt to find out what is > expected in the device tree. > > Cheers, > g. > > _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
