Benedict, Michael wrote:
Hello,
I wrote a driver for a 4 segment digital display device. I have
a requirement that this device be used as early as possible to report
kernel bootup state. The driver itself is pretty simple, just using
in/out_be32() and udelay(). The problem is that I don't know how to use
hardware resources in the early stages of booting, before I can call
request_mem_region() and friends.
Can anyone recommend a book / documentation / reference code /
anything that demonstrates this, or at least could improve my
understanding enough to accomplish this?
u-boot for embedded (or OpenBios) documentation, source code.
Look for splash screen code although you will want to make
multiple calls for various boot states. In the ISA days and now
PCI there are cards that display a two hex-digit POST progress
code which is a single x86, 8bit output instruction to port 0x80.
This may still be supported in closed source BIOS distributions.
Not sure what they do now with PCIe since it will take more than
a single, simple processor instruction.
-Frank Bennett
Many thanks,
Michael
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--
*/Frank Bennett
President/*
Mathegraphics,LLC
613 Bentley Pl
Fort Collins,CO 80526
970-229-9269 (hm) 970-402-9269 (cell)
www.mathegraphics.com <http://www.mathegraphics.com>
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
"I think there's a world market for about five computers."
-- attr. Thomas J. Watson (Chairman of the Board, IBM), 1943
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
