Hi, all: I am using BDI2000 with PowerPC. Sometimes, when I try to change configuration of BDI2000 for different PowerPC boards, the configuring procedure may meet the following errors:
[EMAIL PROTECTED]:/home/zhour/bdi2000sw/bdisetup2007# ./bdisetup -v -p/dev/ttyS0 -b115 Connecting to BDI loader failed (-1201) I also have tried /dev/ttyS1 and got the same result, and I am sure there is not any other programs occupying the serial ports. So would anyone give me some advice about this? Another problem is "PPC: JTAG instruction stuff overrun" during debugging. For this error, I found an explanation (http://www.ultsol.com/faq_p202.htm): "When in debug mode the PPC4xx fetches normal PPC instructions from the JTAG port. The error "# PPC: JTAG instruction stuff overrun" is raised when the processor stops fetching from the JTAG port, possibly because the processor hangs at an un-terminated memory transfer." The proposed resolution is based on the modification of configuration file. However, I have tried that but it seems to have no effect. Best wishes Best wishes Zhou Rui Distributed and Embedded System Lab Room 532, Information Building School of Information Science Lanzhou University, P. R. China Tel: 86-0931-8912025 Zip Code: 730000 ___________________________________________________________ 雅虎邮箱传递新年祝福，个性贺卡送亲朋！ http://cn.mail.yahoo.com/gc/index.html?entry=5&souce=mail_mailletter_tagline _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
