Hi all,
The engineers of Freescale have recognized a problem in the PSC SPI Slave
Select signal when there is a heavy ethernet loading. Textually they say:
" I have tested the MPC5200B FEC and PSC6 SPI.
You are right. If there is heavy Ethernet loading, the PSC SPI can stop during
transmission with SS goes high.
Use a general-purpose output as SPI slave select signal instead PSC SPI SS
signal.
Factory is informed about similar incorrect behaviour of the PSC SPI slave
select."
We have repeated the error in three scenarios:
In our MPC5200B custom board with a Denx 2.4.25 kernel.
In a Lite5200B with a Denx 2.4.25 kernel.
In a Lite5200B with the freescale bsp:
mpc5200_lite5200b_20070203_ltib-rc4. It's a 2.6.16 kernel version.
We have checked the PSC3 and PSC6 and the behaviour is the same.
So, it seems is a chip's bug and we must avoid to use the SS signal with the
PSC SPI if we want to communicate by ethernet. I think it's a probabilistic
error and in case there is some traffic in ethernet and a transmission by SPI
at the same time it could happen.
Best regards,
Txema López.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
