Hi Robert, I didn't solve the problem yet. I'm having problems with the memset_io in early_init and am studying if the SDRAM is initializing right. Any progress I'll send to the list.
Good luck, On Wed, Feb 20, 2008 at 7:24 PM, Robert Woodworth <[EMAIL PROTECTED]> wrote: > Have you solved your problem?? > > I'm having the *EXACT* same problem on a Virtex4FX60. > The device is configured with PLBv46/MPMC3/LL_TEMAC. > > I'm under the suspicion that the PLB is issuing an error when switching > to virtual mode and that there is either a timing/synthesis error or a > fundamental error with the way the FPGA is getting synthesized with the > PLB. > > > RJW. > > > > > > On Wed, 2008-02-13 at 12:02 -0700, David Baird wrote: > > On Feb 13, 2008 11:49 AM, Ricardo Ayres Severo <[EMAIL PROTECTED]> wrote: > > > Executing without single step the exception doesn't occurs. But at > > > __log_buf I get only trash, even after reseting the processor. > > > How can I send some characters to uartlite on asm code? > > > > Great. This confirms that I am not crazy. You are having similar > > results as I did. But I still don't yet know why single-step and > > memory read can't be used in virtual mode... > > > > > > > _______________________________________________ > Linuxppc-embedded mailing list > [email protected] > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > -- Ricardo Ayres Severo <[EMAIL PROTECTED]> _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
