Hello, I am dealing with external interrupts on an custom board of the mpc5200b. Kernel is 2.6.24 from kernel.org.
I can declare the interrupt in the dts for the board and the control register is set correctly, i.e. the correct external interrupt is enabled. On the other hand the type is ignored and is always level interrupt active low. Is this intended behaviour? How can I pass in the interrupt type from the dts to the kernel? I need to have the interrupt as edge interrupt, rising edge type? rg kd
_______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
