Disregard the boot strapping problem. It appears we are hardwired strapped to use option "C" however my CPU is not being recognized as a 667MHz. Which option should I be using for the 667MHz processor?
_____ From: Dave Cogley [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 02, 2008 10:15 AM To: 'linuxppc-embedded@ozlabs.org' Subject: u-boot ppc440epx bootstrap configuration without eval board Hello, We are using the new AMCC ppc440epx 667MHz chip and I am trying to get u-boot to recognize the clock rate of the new chip (we were using the 533MHz). I notice in the cmd_sequoia.c module that there is an option to setup some sort of strapping in the configuration FPGA that was present on the evaluation card. We do not have this configuration FPGA present in our production board. Is there some sort of build flag I can specify to "hardwire" this bootstrap information? Or at least some I can tell u-boot to startup with the 667MHz clock rate? I believe we are using option 7 in the configuration array for the "bootstrap" command. Thanks, Dave Cogley Software Engineer Ultra Stereo Labs, Inc. (805) 549-0161 mailto:[EMAIL PROTECTED]
_______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
