I've been trying to build the linux 2.6.23 kernel for the PPC405 on the
xilinx ml403. I copied over my xparameters.h and xparameters_ml40x.h files
and added the following options through menuconfig.
Enable loadable module support: DISABLE
Processor:
- Type 40x
- Math emulation: ENABLE
- IBM 40x options:
- Machine Type: "Xilinx-ML403"
Platform options:
- Kernel command line: "console=ttyUL0 root=/dev/ram"
Bus options:
- PCI support: DISABLE
- PCCARD (PCMCIA/CardBus) support:
- PCCARD (PCMCIA/CardBus) support: DISABLE
Drivers
- Block Devices:
- Xilinx SystemACE support: ENABLE
- Character devices:
- Serial drivers:
- Xilinx uartlite serial port support: ENABLE
- Support for console on Xilinx uartlite serial port:
ENABLE
I then ran make bzImage and got the following errors. I'm guessing there
are two options I chose that conflict. Any insight?
CC arch/powerpc/kernel/swsusp.o
arch/powerpc/kernel/swsusp.c 19 error: redefinition of
'save_processor_state'
include/asm/suspend.h 7 : previous definition of 'save_processor_state' was
here
arch/powerpc/kernel/swsusp.c 35 error: redefinition of
'restore_processor_state'
include/asm/suspend.h 11 : previous definition of 'restore_processor_state'
was here
Thanks,
Sam
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
