Allt som har med skatter är per definition inte logiskt!
On Wed, 23 Apr 2008, Peter Korsgaard wrote:
"Aaron" == Aaron Sells <[EMAIL PROTECTED]> writes:Hi, Aaron> [EMAIL PROTECTED]:/# dmesg | grep -i usb Aaron> [ 0.175963] usbcore: registered new interface driver usbfs Aaron> [ 0.178207] usbcore: registered new interface driver hub Aaron> [ 0.179810] usbcore: registered new device driver usb Aaron> [ 3.426016] usbcore: registered new interface driver ub Aaron> [ 4.156086] usbmon: debugfs is not available Aaron> [ 4.209160] Initializing USB Mass Storage driver... Aaron> [ 4.268302] usbcore: registered new interface driver usb-storage Aaron> [ 4.336109] USB Mass Storage support registered. Aaron> [ 4.958294] usbcore: registered new interface driver usbhid Aaron> [ 5.020120] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Yes, the USB core and drivers gets loaded, but because you haven't provided a struct platform_device the c67x00 driver doesn't get probed. Aaron> It still doesn't look like the ML403 Cypress host device is being Aaron> recognized. No messages appear upon insertion and removal of USB Aaron> devices. Aaron> Regards, Aaron> Aaron Sells Aaron> diff linux-2.6-xlnx_arch-ppc-syslib-virtex_devices.c secretlab_arch-ppc-syslib-virtex_devices.c Aaron> 77,92d76 Aaron> < * ML300/ML403 Video Device: shortcut macro for single instance Please use diff -u. I don't see anything with platform devices for the c67x00 driver. You need something like: #include <linux/usb/c67x00.h> static struct resource c67x00_resources[] = { [0] = { .start = 0x84000000, .end = 0x8400000f, .flags = IORESOURCE_MEM, }, [1] = { .start = 3, .end = 3, .flags = IORESOURCE_IRQ, }, }; static struct c67x00_platform_data thinlite_c67x00_data = { .sie_config = C67X00_SIE1_HOST | C67X00_SIE2_PERIPHERAL_B, .hpi_regstep = 0x02, /* A0 not connected on 16bit bus */ }; static struct platform_device thinlite_c67x00 = { .name = "c67x00", .id = 0, .num_resources = ARRAY_SIZE(c67x00_resources), .resource = c67x00_resources, .dev.platform_data = &thinlite_c67x00_data, }; Which you then register with the platform bus with platform_add_devices or similar. Either you do this by hand or you create XPAR_* macros which take the needed info out of xparameter.h (sorry, I don't have an xparameters.h with those defines at hand). Aaron> diff -Naur c67x00.old/c67x00-drv.c c67x00/c67x00-drv.c Aaron> --- c67x00.old/c67x00-drv.c 2008-04-23 10:36:16.000000000 -0400 Aaron> +++ c67x00/c67x00-drv.c 2008-04-23 10:39:20.000000000 -0400 Aaron> @@ -57,8 +57,7 @@ Aaron> c67x00_hcd_probe(sie); Aaron> break; Aaron> - case C67X00_SIE_PERIPHERAL_A: Aaron> - case C67X00_SIE_PERIPHERAL_B: Aaron> + case C67X00_SIE_PERIPHERAL: This seems to be from an earlier version of my driver. -- Bye, Peter Korsgaard _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
_______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
