I would be ecstatic to look at/collaborate on what you have. I do not care if you clean it up. It can not be harder to work with than my own code or the Xilinx code.
In the end I need Linux, GreenHills, as well as a lightweight stripped driver for a monitor and embedded mini-web server. I have all the above for the older PLB TEMAC in FIFO mode, but we are moving to the LL TEMAC. I started through the xilinx code and rapidly remembered how long it took to demacrofy the xilinx PLB TEMAC code down to a single source file with only the code actually needed, and got depressed. This is critical to us now, so I can put time into it. If I can figure out how to bring up a git server on my hosting service I am willing to host work on this - though one of the existing trees might be a better choice. Koss, Mike (Mission Systems) wrote: > I have the start of a lltemac based on the new XPS_LL_TEMAC from EDK > 9.2. I'm currently in the process of upgrading my design to 9.2. So I > will be very much interested in the driver working ;). > > I'll see what I can get cleaned up and posted somewhere, if you'd like > to take a look at it. > > -- Mike > > (sorry for the double post, if it happens but it seems that my last > e-mail was blank per my records.) > > -----Original Message----- > From: David H. Lynch Jr. [mailto:[EMAIL PROTECTED] > Sent: Sunday, April 20, 2008 7:49 PM > To: Grant Likely > Cc: linuxppc-embedded > Subject: Re: Xilinx PowerPC > > Thanks, > > I have alot of work to do on our stuff, I might as well see if I can > move to the powerpc tree at the same time. > > BTW is there even the beginings of a non-xilinx lltemac driver out > there ? There were hints on the list, but I have not seen anything. > > I would be happy to help advance the ball on anything anyone has > started. > > > > Grant Likely wrote: > >> On Sun, Apr 20, 2008 at 2:31 PM, David H. Lynch Jr. <[EMAIL PROTECTED]> >> > wrote: > >> >> >>> Thanks. >>> >>> I am running linus's 2.6.25-rc9, but I can pull the Xilinx tree >>> or yours - when your server is up. >>> >>> I can not find any Xilinx powerpc configs in arch/powerpc/config >>> Do I just need to do a >>> make ARCH=powerpc menuconfig and create one from scratch ? >>> >>> >> That's right; I haven't merged any defconfigs. Roll your own. >> >> >> >>> Is simpleboot in your tree or the xilinx tree, if can not find >>> it in Linus's ? >>> >>> >> If you want to use the "simpleboot" wrapper; then you'll need to pull >> paulus' tree (Linus hasn't yet pulled his tree; but he probably will >> any moment now). >> >> Cheers, >> g. >> >> >> > > > -- Dave Lynch DLA Systems Software Development: Embedded Linux 717.627.3770 [EMAIL PROTECTED] http://www.dlasys.net fax: 1.253.369.9244 Cell: 1.717.587.7774 Over 25 years' experience in platforms, languages, and technologies too numerous to list. "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction." Albert Einstein _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded