Hi, all expert! Thank you for your patience.
I want to use Linux as the OS of freescale lite5200b develop board. Then I have tried two version of kernel, 2.6.25.4 and 2.4.25. We succeed in 2.4.25, failed in 2.6.25.4. We use the default config file for the board, lite5200_defconfig, which would be found both in /arch/ppc/configs/. And we use the same ramdisk. The following info is about the error of 2.6.15.4. *=> bootm fe000000 fe200000 ## Booting image at fe000000 ... Image Name: Linux-2.6.25 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 802989 Bytes = 784.2 kB Load Address: 00000000 Entry Point: 00000000 Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at fe200000 ... Image Name: rootfs in flash Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 5055519 Bytes = 4.8 MB Load Address: fe5a0000 Entry Point: fe5a0000 Loading Ramdisk to 0fa7c000, end 0ff4e41f ... OK id mach(): done MMU:enter MMU:hw init MMU:mapin MMU:setio MMU:exit setup_arch: enter setup_arch: bootmem arch: exit* Would you please help us to solve it and explain the cause? Best regards! Sincerely yours, Henry
_______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
