On Wed, Jun 11, 2008 at 9:36 PM, Andrew Schmidt <[EMAIL PROTECTED]> wrote: > First off, thank you everyone for replying, I must admit I was only > expecting a few people to reply, but this is great. I certainly am > interested in any help I can get. I suspect my first task is to go over the > information given and then start to draft up a simple text file. I am more > experienced with the Xilinx PPC so initially the documentation may seems a > little biased, but if anyone with other areas of expertise (as is evident > from the emails received thus far) wants to help broaden it, that would be > great. I will get back to you shortly with my first "attempt."
I'm currently working with a custom design on a Xilinx ML300 board to evaluate the realtime capabilities of the linux kernel with rt-patches. Since this is my first experience with embedded Linux I had the most trouble with understanding the coherences of the most general stuff like the difference between ppc and powerpc as well as the need for a device tree within powerpc but not ppc. Everything is documented very well for it's own, but I would appreciate to see a documentation that gives a bit more overview to the subject which is important for beginners. Well, I'm going to document my work from the system design using EDK and ISE through to creating a running linux from scratch based on this design. I'd like to support your documentation as much as I can. Regards, Jens Wirth _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
