Hi,
I am new to virtex 4 platform and i am trying to bringup u-boot on ML403
board. I download u-boot.zip ftrom ML410 site and am trying to compile
it for
ML403 using the following command
make ml403_config
make
and i am getting the following error.
../xilinx_iic/iic_adapter.c: In function 'receive':
.../xilinx_iic/iic_adapter.c:91: error: 'XIIC_STOP' undeclared (first use
in this function)
.../xilinx_iic/iic_adapter.c:91: error: too many arguments to function
'XIic_Send'
.../xilinx_iic/iic_adapter.c:96: error: too many arguments to function
'XIic_Recv'
make[1]: *** [../xilinx_iic/iic_adapter.o] Error 1
Am i missing some files or patch here? Does someone have a ready made
code for u-boot on ML403? If so can you
please share it with me.
Thanks & Rgds
Anand
DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended
for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates.
Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the
opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of
this message without the prior written consent of the author of this e-mail is
strictly prohibited. If you have
received this email in error please delete it and notify the sender
immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
