Hey all,
I did a little preliminary poking through the thread archives, but
didn't turn anything up. I anyone could just point me in the right
direction as far as troubleshooting, that would be great!
I'm trying to compile the Xilinx patched kernel tree (v2.6.25-rc9) and
run it on an ML405
So far, I get to the following point in the boot sequence:
loaded at: 00400000 005AF5A0
board data at: 005AD524 005AD5A0
relocated to: 00405058 004050D4
zimage at: 00405E90 0051D6CC
initrd at: 0051E000 005ACC0D
avail ram: 005B0000 80000000
Linux/PPC load: console=ttyS0,9600 ip=on root=/dev/ram rw
Uncompressing Linux...done.
Now booting the kernel
The system hangs after it says "Now booting the kernel."
Once again, any input would be appreciated.
thank you,
Lorenzo
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
