Hi all of you, I am working to port linux2.6.26 on board based on lite5200, but the kernel hangs here ( see output) # Booting image at ff000000 ... Image Name: Linux-2.6.26-rc9 Created: 2008-07-09 14:05:34 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1738816 Bytes = 1.7 MB Load Address: 00400000 Entry Point: 00400550 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at ff200000 ... Image Name: ram disk Created: 2008-07-09 14:28:18 UTC Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 5878062 Bytes = 5.6 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 039c3000, end 03f5e12e ... OK Memory <- <0x0 0x4000000> (64MB) CPU clock-frequency <- 0x1687d280 (378MHz) CPU timebase-frequency <- 0x1406f40 (21MHz) CPU bus-frequency <- 0x501bd00 (84MHz)
zImage starting: loaded at 0x00400000 (sp: 0x03f5ede0) Allocating 0x3887b8 bytes for kernel ... gunzipping (0x00000000 <- 0x0040d000:0x00788e30)...done 0x3683e0 bytes Using loader supplied ramdisk at 0x39c3000-0x3f5e12e initrd head: 0x1f8b0808 Linux/PowerPC load: root=/dev/ram rw console=ttyPSC0 ramdisk_size=16000 ip=192.168.0.133:192.168.0.131:192.168.0.2:255.255.255.0::eth0:off Finalizing device tree... flat tree at 0x795300 :)))))) I compiled ramdisk with arch/powerpc but I got the same problem, I dont know if someone has reesolved this issue thanks
_______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
